• Open, flexible ring design with eyelets at the open end of the ring
• Available in diameters of 12 mm for small eyes and 13 mm for large eyes, which compress to 10 mm and 11 mm respectively after insertion
• Can be inserted with forceps or the included reusable syringe-style Micro Inserter

The Stabileyes Capsular Tension Ring (CTR) semi-circular ring is made entirely of Perspex CQ UV (ultraviolet light absorbing polymethylmethacrylate, PMMA) with one manipulation eyelet at each end of the ring.

Yes

Yes

Perspex CQ PMMA

• Open C-shaped loop with staggered indentations to facilitate cortical removal
• The 12.10 mm diameter ring compresses to 11 mm after insertion
• Available preloaded on an EyeJet or can be inserted manually or with Geuder Injector

The Henderson CTR (HCTR), designed by Bonnie Henderson, MD, is a modification of the standard CTR that features indentations for easier nuclear and cortical material removal while still maintaining the desired stretch of the capsular bag. Once the residual material has been removed from under the indentations the Henderson CTR can be rotated to allow further removal of lens material that was previously compressed by the protruding notches. FCI Ophthalmics is the exclusive U.S. distributor of Morcher capsular tension rings.

Yes

Yes

PMMA

• The only Cionni CTR preloaded on an EyeJet and in a clockwise injection mode
• Diameter is 11 mm
• Specially indicated for severe or traumatic zonular dehiscence or dialysis with pupil abnormalities whenIris Retractors and other CTRs cannot achieve capsular stability.

The Malyugin/Cionni CTR features a curved end designed to eliminate risk of perforating the capsular bag by allowing the leading end of the CTR to slide along the equator of the bag. The eyelet at the curved end is sutured to the sclera for secure fixation and offers an alternative to capsule supporting hooks. FCI Ophthalmics is the exclusive U.S. distributor of Morcher capsular tension rings.

Yes

Not Specified

PMMA

• The only Cionni CTR preloaded on an EyeJet and in a clockwise injection mode
• Diameter is 11 mm
• Specially indicated for severe or traumatic zonular dehiscence or dialysis with pupil abnormalities whenIris Retractors and other CTRs cannot achieve capsular stability.

The Cionni CTR, designed by Robert J. Cionni, MD, is a modified version of the Morcher CTR. This version features one suturable arm designed for scleral fixation. It is used to stabilize and recenter the capsular bag in cases of damaged or missing zonules. FCI Ophthalmics is the exclusive U.S. distributor of Morcher capsular tension rings. FCI Ophthalmics is the exclusive U.S. distributor of Morcher capsular tension rings.

Yes

Yes

PMMA

• C-shaped loop with one suturable arm to fixate the CTR to the sclera
• Diameter is 11 mm compressed
• Cannot be implanted with an injector

The Cionni CTR, designed by Robert J. Cionni, MD, is a modified version of the Morcher CTR. This version features one suturable arm designed for scleral fixation. It is used to stabilize and recenter the capsular bag in cases of damaged or missing zonules. The suturable arm is on the opposite side from the Type 2C version. FCI Ophthalmics is the exclusive U.S. distributor of Morcher capsular tension rings.

Yes

Yes

Clear PMMA

• C-shaped loop with two suturable arms to fixate the CTR to the sclera
• Diameter is 11 mm compressed
• May be inserted with the Geuder Injector (G-32955), drawn up to 3/4 of the way only

The Cionni CTR, designed by Robert J. Cionni, MD, is a modified version of the Morcher CTR. This version features two suturable arms designed for scleral fixation. It is used to stabilize and recenter the capsular bag in cases of damaged or missing zonules. FCI Ophthalmics is the exclusive U.S. distributor of Morcher capsular tension rings.

Yes

Yes

Clear PMMA

• Open C-shaped loop
• Axial length of 24-28mm for normal or myopic eyes
• Diameter is 13 mm (11 mm compressed)
• Unloaded CTRs can be inserted manually or with the Geuder Injector
• Available preloaded on EyeJet Injector for clockwise and counterclockwise insertion

The Type 14C capsular tension ring made by Morcher has an axial length of 24-28 mm for normal or myopic eyes. FCI Ophthalmics is the exclusive U.S. distributor of Morcher CTRs.

Yes

Yes

Clear PMMA

• Open C-shaped loop
• Axial length 24-28 mm for normal and myopic eyes
• Diameter is 14.5 mm (12 mm compressed)
• Unloaded CTRs can be inserted manually or with the Geuder Injector
• Available preloaded on EyeJet Injector for clockwise and counterclockwise insertion

The Type 14A capsular tension ring made by Morcher has an axial length of >28 mm for highly myopic eyes. FCI Ophthalmics is the exclusive U.S. distributor of Morcher CTRs.

Yes

Yes

PMMA

• Open C-shaped loop
• Diameter is 12.3 mm (10 mm compressed)
• Axial length of <24 mm for normal eyes
• Unloaded CTRs can be inserted manually or with the Geuder Injector
• Available preloaded on EyeJet Injector for clockwise and counterclockwise insertion

The Type 14 capsular tension ring made by Morcher has an axial length of <24 mm for normal eyes. FCI Ophthalmics is the exclusive U.S. distributor of Morcher CTRs.

Yes

Yes

Clear PMMA

• Open C-shaped loop
• Available in diameters of 12 mm and 13 mm, which compress to 10 mm and 11 mm respectively after insertion
• Available preloaded on RingJect system for clockwise and counterclockwise insertion

RingJect system consists of a capsular tension ring (CTR) preloaded in a single use injector. Two sizes of rings are available.

Yes

Yes

Clear PMMA

• C-shaped loop with one suturable arm to fixate the CTR to the sclera
• Available in 11 mm (compressed) diameter
• May be inserted with the Geuder Injector (G-32955), drawn up to 3/4 of the way only

The Cionni CTR, designed by Robert J. Cionni, MD, is a modified version of the Morcher CTR. This version features one suturable arm designed for scleral fixation. It is used to stabilize and recenter the capsular bag in cases of damaged or missing zonules. The suturable arm is on the opposite side from the Type 1L version. FCI Ophthalmics is the exclusive U.S. distributor of Morcher capsular tension rings.

Yes

Yes

Clear PMMA