• Single-piece biconvex, anterior aspheric surface optic
• Hydrophobic acrylic with polyvinylidene fluoride (PVDF) and nano-particles of carbon mask
• Patients can gain nearly 3.00 diopters of depth of focus.
• 12.5 mm overall length with modified C haptic with 5 degree angulation
• The IC-8 IOL is it only needs to be implanted in one eye
• Power ranges from +15.5 D to +27.5 D in 0.50 D increments

The IC-8 IOL combines the simple principle of small aperture optics with an aspheric monofocal IOL by embedding an opaque mask with a 1.36 mm central aperture into a one-piece lens. The central aperture filters unfocused peripheral light rays and isolates more focused central rays through the central aperture to deliver a natural range of vision with greater spectacle independence.

No

Yes

Hydrophobic Acrylic

6.0

EDOF

• Single-piece IOL with 12.0 mm oveall length
• Designed with eyelets on the haptics
• SLANT1 haptics with slightly curved radius

A ultraviolet-absorbing PMMA single-piece posterior chamber IOL with eyelets on the haptics through which sutures can be passed for lens fixation. The slanted haptics have a slightly curved radius.

Yes

Yes

Ultraviolet-absorbing PMMA

7.0

Monofocal

• Single-piece lens anterior chamber IOL available in overall lengths from 12.0 mm to 14.4 mm in 0.5 mm increments
• Haptic vault height for all sizes is 0.5 mm
• Power ranges from +5.0 D through +30.0 D
• Convexoplano configuration

Alcon UV-absorbing PMMA single-piece anterior chamber lenses are designed to be positioned anterior to the iris where it should replace the optical function of the natural crystalline lens. However, accommodation will not be replaced. The physical properties of these lenses are

Yes

Yes

PMMA (Ultraviolet-absorbing)

5.5

Monofocal

• For available power range see Alcon Product Guide
• Biconvex toric aspheric optic with Stableforce haptics
• Cylinder powers available in 1.50 D (SN6AT3), 2.25 D (SN6AT4), 3.00 D (SN6AT5)

The AcrySof IQ toric posterior chamber IOL (models SN6AT3, SN6AT4, SN6AT5) is a single-piece UV-absorbing foldable lens that consists of a high refractive index material with proprietary blue light filtering chromophores which filters light in a manner that approximates the crystalline lens in the 400-475 nm blue light wavelength range. The biconvex toric aspheric optic consists of a high refractive index soft acrylic material capable of being folded prior to insertion.The supporting haptics provide for proper positioning and fixationof the IOL optic within the eye. The anterior surface of the lens is designed with negative spherical aberration identical to the aspheric AcrySof IQ IOL (model SN60WF) to compensate for the positive spherical aberration of the cornea.

Yes

Yes

Acrylate/Methacrylate Copolymer (Ultraviolet and blue light filtering)

6.0

Toric

• Single-piece lens measuring 13.0 mm in overall length
• Reduces transmittance of blue light wavelengths
• Power ranges from +6.0 D through +30.0 D
• Anterior asymmetric biconvex with Stableforce haptics

The AcrySof IQ lens (model SN60WF) is a single-piece IOL with proprietary blue light filtering chromophores that filter light in a manner that approximates the crystalline lens in the 400-475 nm blue light wavelength range. The lens is made from a high refractive index soft acrylic material that gently unfolds following implantation. The posterior aspheric surface was designed with negative spherical aberration to compensate for the positive spherical aberration of an average cornea.

Yes

Yes

Acrylate/Methacrylate Copolymer (Ultraviolet and blue light filtering)

6.0

Monofocal

• Provides a broad range of vision from 16 inches (40 cm) to distance
• Anterior apodized diffractive aspheric surface with central diffractive zone
• Single-piece design with Stableforce haptics

AcrySof IQ ReSTOR Multifocal +4.0 D Add IOL (model SN6AD3) is an apodized diffractive, multifocal IOL with ultraviolet and blue light filtering capabilities. The anterior surface is designed with negative spherical aberration to compensate for the positive spherical aberration of the cornea. The pupil-adaptive optical design distributes light more evenly between the near and distance focal points in photopic conditions, favoring distance more as the pupil expands in mesopic conditions.

Yes

Yes

Acrylate/Methacrylate Copolymer (Ultraviolet and blue light filtering)

6.0

Multifocal

• Single-piece design, apodized diffractive IOL with Stableforce haptics
• A larger diffractive region than the AcrySof IQ ReSTOR +2.5 D IOL
• Negative asphericity (-0.1 micron)

The AcrySof IQ ReSTOR Multifocal +3.0 D Add IOL (models SN6AD1) is an apodized diffractive, multifocal IOL with ultraviolet and blue light filtering capabilities. The anterior surface is designed with negative spherical aberration to compensate for the positive spherical aberration of the cornea. The pupil-adaptive optical design optimize performance in all lighting conditions. The 9 diffractive steps are spaced closer together than the AcrySof IQ ReSTOR +2.5 D IOL and it has a 0.86 mm-diameter central diffractive zone dedicated 60% to the near focal point (40% to distance).

Yes

Yes

Acrylate/Methacrylate Copolymer (Ultraviolet and blue light filtering)

6.0

Multifocal

• Single-piece design with Stableforce haptics
• Anterior apodized diffractive aspheric surface with central refractive zone and a toric posterior surface
• Power ranges from +6.0 D through +30.0 D in 0.5 D increments with a +2.5 D add power
• Cylinder power ranges available in 1.50 D, 2.25 D, 3.00 D, and 3.75 D

AcrySof IQ ReSTOR +2.5 D Multifocal Toric IOL (models SV25T3, SV25T4, SV25T5, and SV25T6) has an biconvex optic that contains an aspheric apodized diffractive structure with a central refractive zone on the anterior surface and a toric posterior surface. The lens is designed with negative spherical aberration to compensate for the positive spherical aberration of the cornea. The add power of +2.5 D is designed to provide optimal vision at 53 cm for activities requiring more intermediate.

Yes

Yes

Acrylate/Methacrylate Copolymer (Ultraviolet and blue light filtering)

6.0

Multifocal, Toric

• Single-piece design, apodized diffractive IOL with Stableforce haptics
• Smaller diffractive region than the AcrySof IQ ReSTOR +3.0 D IOL
• Negative asphericity (-0.2 micron)

AcrySof IQ ReSTOR +2.5 D Multifocal IOL (model SV25T0) is an apodized diffractive, multifocal IOL with ultraviolet and blue light filtering capabilities. The anterior surface is designed with negative spherical aberration to compensate for the positive spherical aberration of the cornea. The pupil-adaptive optical design optimize performance in all lighting conditions. The 7 diffractive steps are spaced closer together than the AcrySof IQ ReSTOR +3.0 D Add IOL and it has a 0.94 mm-diameter central refractive zone dedicated 100% to distance.

Yes

Yes

Acrylate/Methacrylate Copolymer (Ultraviolet and blue light filtering)

6.0

Multifocal

• Multipiece multifocal IOL with + 3.0 diopters of add power for near vision
• For available power range see Alcon Product Guide
• Optic identical to the leading single piece AcrySof IQ ReSTOR +3.0 D IOL SN6AD1 model; PMMA haptics

AcrySof IQ ReSTOR +3.0 D IOL (model MN6AD1) is an ultraviolet and blue light filtering foldable multifocal intraocular lens. The optical portion consists of a high refractive index material with proprietary blue light filtering chromophore which filters light in a manner that approximates the crystalline lens in the 400-475 nm blue light wavelength range. The optical portion is symmetric biconvex and consists of a soft acrylic material capable of being folded prior to insertion. The supporting haptics provide for proper positioning of the IOL optic within the eye. The anterior surface of the lens is designed with negative spherical aberration to compensate for the positive spherical aberration of an average cornea.

Yes

Yes

Acrylate/Methacrylate Copolymer (Ultraviolet and blue light filtering)

6.0

Multifocal

• Single-piece design with Stableforce haptics
• Anterior apodized diffractive aspheric surface with central refractive zone and a toric posterior surface
• Power ranges from +6.0 D through +30.0 D in 0.5 D increments with a +2.5 D add power
• Cylinder power ranges available in 1.50 D, 2.25 D, 3.00 D, and 3.75 D

AcrySof IQ ReSTOR +3.0 D IOL (models SND1T3, SND1T4, SND1T5, and SND1T6) has an biconvex optic that contains an aspheric apodized diffractive structure with a central refractive zone on the anterior surface and a toric posterior surface. The lens is designed with negative spherical aberration to compensate for the positive spherical aberration of the cornea. The add power of +2.5 D is designed to provide optimal vision at 53 cm for activities requiring more intermediate.

Yes

Yes

Acrylate/Methacrylate Copolymer (Ultraviolet and blue light filtering)

6.0

Multifocal, Toric

• Multi-piece lens measuring 13.0 mm in overall length with PMMA haptics angled 10 degrees
• Reduces transmittance of blue light wavelengths
• Power ranges from +6.0 D through +30.0 D
• Anterior asymmetric biconvex

AcrySof (model MN60AC) is a multipiece posterior chamber lens with proprietary blue light filtering chromophores that filter light in a manner that approximates the crystalline lens in the 400-475 nm blue light wavelength range. The lens optic is made from high refractive index soft acrylic material capable of being folded prior to insertion. The lens gently unfolds to a full-size lens body following implantation. These lenses have anterior asymmetric biconvex optics with supporting haptics.

Yes

Yes

Acrylate/Methacrylate Copolymer (Ultraviolet-absorbing)

6.0

Monofocal

• Single-piece, clear acrylic lens
• Anterior Asymmetric Biconvex
• Power ranges from +6.0 D through +30.0 D

The AcrySof Aspheric IOL (model SA60WF) is an ultraviolet-absorbing acrylic foldable single-piece IOL. The lens consists of a high refractive index soft acrylic material capable of being folded prior to insertion. The lens has a biconvex optic with supporting haptics. The posterior aspheric surface is designed with negative spherical aberration to compensate for the positive spherical aberration of an average cornea.

Yes

Yes

Acrylate/Methacrylate Copolymer (Ultraviolet and blue light filtering)

6.0

Monofocal

• Single-piece, clear acrylic lens
• Anterior Asymmetric Biconvex
• Power ranges from +6.0 D through +30.0 D

The AcrySof IOL (model SA60AT) is an ultraviolet-absorbing acrylic foldable single-piece lens. The biconvex optic and supporting haptics consist of a high refractive index soft acrylic material.

Yes

Yes

Acrylate/Methacrylate Copolymer (Ultraviolet and blue light filtering)

6.0

Monofocal

• Single-piece lens measuring 13.0 mm in overall length
• Power ranges from +6.0 D through +40.0 D
• Anterior Asymmetric Biconvex with Stableforce haptics

The AcrySof Natural (model SN60AT) is an ultraviolet and blue light filtering acrylic foldable single-piece lens. Proprietary blue light filtering chromophore filters light in a manner that approximates the crystalline lens in the 400-475 nm blue light wavelength range. The biconvex optic with supporting haptics consists of a high refractive index soft acrylic material capable of being folded prior to insertion.

Yes

Yes

Acrylate/Methacrylate Copolymer (Ultraviolet and blue light filtering)

6.0

Monofocal

• Modified plate haptic lens with hinges across the plates adjacent to the optic enable forward movement
• AO1UV, the 11.5 mm model, is available in powers ranging from +17 to +33 D in 0.5 D steps and +18 to +22 D in 0.25 D steps
• AO2UV, the 12.0 mm model, is available in powers ranging from +4 to +9 D in 1.0 D steps and +10 to +24 D in 0.5 D steps
• Silicone (10% UV Cutoff at 400nm) 

Designed to accommodate like a natural crystalline lens with forward movement, Crystalens Advanced Optics (AO) was the first FDA-approved accommodating IOL. The aberration-free lens has uniform center-to-edge power, producing a more natural range of vision with excellent contrast sensitivity and minimized issues with halos and glare.

Yes

Not Specified

Silicone and polyimide haptic loops

5.0

Accommodating

• Aspheric optics with a sharp edge design
• Power ranges available from 0.0 D to +34.0 D (0.0 D to +10.0 D in 1.0 D increments; +10.0 D to +30.0 D in 0.5 D increments; and +30.0 D to +34.0 D in 1.0 D increments)
• The BLIS injector system, a reusable hand piece and single-use cartridge, was designed exclusively for use with the enVista IOL

The enVista intraocular lens is a hydrophobic, single-piece ultra-violet absorbing posterior chamber intraocular lens designed to be free of spherical aberration. Glistenings, caused by fluid-filled microvacuoles that can form within an IOL, are abated by hydrating the lens to equilibrium water content and packaging the lens in 0.9% saline solution. Step-vaulted haptics vault the optic posteriorly for direct contact with the capsular bag.

Yes

No

Hydrophobic Acrylic

6.0

Monofocal

• Aspheric optic that can provide uncorrected distance and intermediate vision and functional near vision
• The FDA clinical study of the Trulign Toric IOL showed 96.1% of eyes had 5 degrees or less rotation between the day of surgery and 4 to 6 months postoperatively
• Power ranges available from +4.0 to +10.0 D in 1.0 D Increments and +10.5 to +33.0 D in 0.5 D increments
• Cylinder powers availabel in 1.25, 2.00, 2.75 D
• Silicone (10% UV Cutoff at 400nm)

The Trulign Toric IOL is a toric modification of the company's Crystalens AO, with the addition of a toric optic on the posterior surface and two axial orientation markings on the anterior surface. It was the first FDA-approved IOL for astigmatic correction with a broader range of vision.

Yes

Yes

Silicone and polyimide haptic loops

5.0

Accommodating, Toric

• Aspheric optic with zero spherical aberration and square edge design
• Implantable through a 1.8-mm incision
• Four point haptic design
• 30% thinner than the Akreos AO design
• Power ranges available from 0.0 D to +30.0 D across 3 sizes (11.0 mm (+0 to +15 D); 10.7 mm (+15.5 to +22 D); 10.5 mm (+22.5 to +30 D); power steps available from +0 D to +9 D in 1.0 D steps, +10 D to +30 D in 0.5 D steps)

The Akreos MICS (model M160L) lens combines the benefits of an aberration-free aspheric acrylic lens with the material and design characteristics that allow it to be inserted into a true 1.8 mm incision.

Yes

Yes

Hydrophilic Acrylic with UV Blocker

Not specified

Monofocal

• Aspheric optic with zero spherical aberration and square edge design
• Implantable through a 1.8-mm incision
• Four point haptic design with loops, which enable this lens to be sclerally fixated
• Power ranges available from 0.0 D to +30.0 D across 3 sizes (11.0 mm (+0 to +15 D); 10.7 mm (+15.5 to +22 D); 10.5 mm (+22.5 to +30 D); power steps available from +0 D to +9 D in 1.0 D steps, +10 D to +30 D in 0.5 steps)

The Akreos AO (model AO60) lens combines the benefits of an aberration-free aspheric acrylic lens with the material and design characteristics that allow it to be inserted into a true 1.8 mm incision. The four point haptic design of the Akreos AO features looped ends.

Yes

Yes

Hydrophilic Acrylic with UV Blocker

Not specified

Monofocal

• Aberration-neutral aspheric optic with sharp 360 degree square posterior edge
• Implantable through incisions as small as 2.4 mm
• Power ranges available from 0.0 D to +34.0 D (+0 D to +4 D in 1.0 D steps; +5 D to +30 D in 0.5 D steps; +31 D to +34 D in 1.0 D steps)

The 3-piece SofPort AO is neutral to the induction of positive or negative spherical aberrations. It has prolate anterior and posterior surfaces and uniform thickness and refractive power from the lens' center to its edge.

Yes

Yes

Hydrophobic Acrylic with UV blocker

6.0

Monofocal

• Fully-preloaded in the iSert injector and implantable through a 2.4 mm incision
• Integrated blue PMMA haptic tip
• Power ranges from +6.0 D to +30.0 D in 0.5 D increments
• Available in USA, Japan, EMEA and APAC

The HOYA iSert 251 intraocular lens is a yellow, blue-blocking hydrophobic acrylic IOL that is fully preloaded. The Aspheric Balanced Curve (ABC) was designed to provide a sharp visual image while the square edge of the lens helps to minimize posterior capsule opacification.

Yes

Yes

Hydrophobic Acrylic

6.0

Monofocal

• Fully-preloaded in the iSert injector and implantable through a 2.4 mm incision
• Integrated blue PMMA haptic tip
• Power ranges from +6.0 D to +30.0 D in 0.5 D increments
• Available in USA, EMEA and APAC

The HOYA iSert 250 intraocular lens is a clear, UV-protecting hydrophobic acrylic IOL that is fully preloaded. The Aspheric Balanced Curve (ABC) was designed to provide a sharp visual image while the square edge of the lens helps to minimize posterior capsule opacification.

Yes

Not specified

Hydrophobic Acrylic

6.0

Monofocal

• Power ranges from +6.0 D to +30.0 D in 0.5 D increments
• Hydrophobic acrylic optic with modified-C PMMA haptics

The Optimized Aspheric IOL blue light absorbing IOL was designed to provide negative spherical aberration along with a unique central power distribution that maintains image quality with misalignment. The Aspheric Balanced Curve (ABC) was designed to provide a sharp visual image while the square edge of the lens helps to minimize posterior capsule opacification.

Yes

Yes

Hydrophobic Acrylic

6.0

Monofocal

• Power ranges from +6.0 D to +30.0 D in 0.5 D increments
• Hydrophobic acrylic optic with integrated C-loop PMMA haptics
• Available in USA and APAC

The unique one-piece, two material design of this intraocular lens provides proper centration and better stability in the eye for greater image sharpness. The yellow blue light filtering optic features an aspheric design.

Yes

Yes

Hydrophobic Acrylic

6.0

Monofocal

• Power ranges from +6.0 D to +30.0 D in 0.5 D increments
• Hydrophobic acrylic optic with integrated C-loop PMMA haptics
• Available in USA and APAC

The unique one-piece, two material design of this intraocular lens provides proper centration and better stability in the eye for greater image sharpness. The clear ultraviolet absorbing optic features an aspheric design.

Yes

Yes

Hydrophobic Acrylic

6.0

Monofocal

• ProTEC frosted, continuous 360 degree posterior square edge design
• Power ranges available from +6.0 D to +30.0 D in 0.5 D increments

The Sensar IOL is a 1-piece lens made from a hydrophobic material not associated with glistenings. The lens reduces the transmission of UV light while still allowing healthy blue light. The edge is designed with a ProTEC frosting to reduce potential edge glare effects and 360? squared edge to limit lens epithelial cell (LEC) migration.

—

—

—

—

—

• ProTEC frosted, continuous 360 degree posterior square edge design
• Power ranges from +5.0 D to +34.0 D in 0.5 D increments
• Implantable through a 2.2 mm to 2.4 mm incision
• Biconvex, anterior aspheric surface, square optic edge
• Also available with the safety and efficiency of the TECNIS iTec Preloaded Delivery System.

The TECNIS Monofocal 1-Piece IOL (model ZCB00) is made from a ultraviolet light-blocking hydrophobic material not associated with glistenings. According to data on file with the company, the lens has reduced chromatic aberration and spherical aberration is corrected to essentially zero.

Yes

Not specified

Hydrophobic Acrylic with UV blocker

6.0

Monofocal

• ProTEC frosted, continuous 360 degree posterior square edge design
• Power ranges from +5.0 D to +34.0 D in 0.5 D increments
• Biconvex, anterior aspheric surface, posterior diffractive surface

The TECNIS Toric IOL (models ZCT150, ZCT225, ZCT300, ZCT400, ZCT450, ZCT525, ZCT600) is made from ultraviolet light-absorbing material that compensates for corneal spherical aberrations and corneal astigmatism. The lens is designed to provide improved uncorrected distance vision, reduction in residual refractive cylinder, and increased spectacle independence for distance vision.

Yes

Yes

Hydrophobic Acrylic with UV blocker

6.0

Toric

• ProTEC frosted, continuous 360 degree posterior square edge design
• Power ranges from +5.0 D to +34.0 D in 0.5 D increments
• Biconvex, wavefront-designed anterior aspheric surface, posterior achromatic diffractive surface designed to reduce chromatic aberration for enhanced image contrast and echelette feature to extend the range of vision.

The TECNIS Symfony Toric Extended Range of Vision IOLs (models ZXT150, ZXT225, ZXT300, and ZXT375) are made from an ultraviolet light-absorbing material and is intended to reduce residual refractive astigmatism and mitigate the effects of presbyopia by providing an extended depth of focus. The lens was designed with a proprietary achromatic diffractive surface to correct chromatic aberration and a unique echelette feature to extend the range of vision, including far, intermediate, and near, while maintaining the corneal spherical aberration compensation. TECNIS Symfony IOLs are designed to have pupil-independent lens performance in any lighting condition.

Yes

Not specified

Hydrophobic Acrylic with UV blocker

6.0

Toric, EDOF

• ProTEC frosted, continuous 360 degree posterior square edge design
• Power ranges from +5.0 D to +34.0 D in 0.5 D increments
• Wavefront-designed toric-aspheric anterior optic designed tocompensate for corneal spherical aberration
• Biconvex, wavefront-designed anterior aspheric surface, posterior achromatic diffractive surface designed to reduce chromatic aberration for enhanced image contrast and echelette feature to extend the range of vision.

The TECNIS Symfony Extended Range of Vision IOL (model ZXR00) is made from an ultraviolet light-absorbing material and is intended to mitigate the effects of presbyopia by providing an extended depth of focus. The lens was designed with a proprietary achromatic diffractive surface to correct chromatic aberration and a unique echelette feature to extend the range of vision, including far, intermediate, and near, while maintaining the corneal spherical aberration compensation. TECNIS Symfony IOLs are designed to have pupil-independent lens performance in any lighting condition.

Yes

Yes

Hydrophobic Acrylic with UV blocker

6.0

EDOF

• ProTEC frosted, continuous 360 degree posterior square edge design
• Power ranges from +5.0 D to +34.0 D in 0.5 D increments
• Biconvex, anterior aspheric surface, posterior diffractive surface

TECNIS Multifocal IOL +2.75 D (model ZKB00) is optimized for patients favoring intermediate vision activities like grocery shopping by delivering tailored clarity at a theoretical reading distance of 50 cm. The lenses incorporate a diffractive multifocal optic pattern designed to provide near, intermediate and distance vision and thereby reduce spectacle dependency. The light distribution between the distance and near focus is approximately 50/50.

Yes

Not specified

Hydrophobic Acrylic with UV blocker

6.0

Multifocal

• ProTEC frosted, continuous 360 degree posterior square edge design
• Power ranges from +5.0 D to +34.0 D in 0.5 D increments
• Biconvex, anterior aspheric surface, posterior diffractive surface

TECNIS Multifocal IOL +3.25 D (model ZLB00) is optimized for patients favoring activities at longer reading distances such as multimedia work by delivering tailored clarity at a theoretical reading distance of 42 cm. The lenses incorporate a diffractive multifocal optic pattern designed to provide near, intermediate and distance vision and thereby reduce spectacle dependency. The light distribution between the distance and near focus is approximately 50/50.

Yes

Not specified

Hydrophobic Acrylic with UV blocker

6.0

Multifocal

• ProTEC frosted, continuous 360 degree posterior square edge design
• Power ranges from +5.0 D to +34.0 D in 0.5 D increments
• Biconvex, anterior aspheric surface, posterior diffractive surface

TECNIS Multifocal IOL +4.0 D (model ZMB00) is optimized for patients favoring near-vision activities like reading and knitting by delivering tailored clarity at a theoretical reading distance of 33 cm. The lenses incorporate a diffractive multifocal optic pattern designed to provide near, intermediate and distance vision and thereby reduce spectacle dependency. The light distribution between the distance and near focus is approximately 50/50.

Yes

Not specified

Hydrophobic Acrylic with UV blocker

6.0

Multifocal

• Unique design engages the X, Y, and Z planes
• Maintains an open space in the capsular bag to faciliate removal or addition of technological platforms
• Engineered to work with intraoperative aberrometry
• Prototype design capable of fitting through a 2.2 mm injector

The Gemini Refractive Capsule is designed to neutralize variables related to effective lens position (ELP). Instead of using two-dimensional arms to hold the lens centrally within the X/Y plane of the eye, the innovative design also controls the Z plane. The capsule contains a true refractive lens and uniquely maintains an open space in the capsular bag for theorhetical incorporation of drug delivery, biometric sensors, or additional refractive lens platforms. The design borrows from current lens designs only with regard to the advanced optics and biocompatible materials from traditional IOLs.

Investigational

Investigational

Not specified

Not specified

Adjustable

• Toric trifocal diffractive optic Double C-loop platform
• Power ranges from + 6.0 D to 35.0 D in 0.5 D increments with additional powers of 1.75D for intermediate vision and +3.50D for near vision
• Cylinder power available in 1.00 D, 1.50 D, 2.25 D, 3.00 D, 3.75 D, 4.50 D, 5.25 D, and 6.00 D

FINEVISION Toric (model Pod FT) is a trifocal toric diffractive IOL with a double c-loop haptic design for optimal rotational stability.

No

Yes

Hydrophilic Acrylic

6.0

Toric, Trifocal

• Trifocal diffractive optic with double C-loop haptics
• Power ranges from +6.0 D to 35.0 D with additional powers of +1.75 D for intermediate vision and +3.50 D for near vision

The FINEVISION Trifocal Optic (Pod F) was the first trifocal diffractive IOL. The optic combines two diffractive structures that are adjusted to offer the +3.5 D addition for near vision and +1.75 D addition for intermediate vision. It is designed so as to reduce the loss of light energy resulting from any diffractive system.

No

Yes

Hydrophilic Acrylic

6.0

Trifocal

• Trifocal diffractive optic with four closed loop haptics
• Power ranges from +10.0 D to 35.0 D with additional powers of +1.75 D for intermediate vision and +3.50 D for near vision

The FINEVISION Trifocal Optic (Micro F) was the first trifocal diffractive IOL. The optic combines two diffractive structures that are adjusted to offer the +3.5 D addition for near vision and +1.75D addition for intermediate vision. It is designed so as to reduce the loss of light energy resulting from any diffractive system.

No

Yes

Hydrophilic Acrylic

6.15

Trifocal

• Power ranges from +6.0 D to 30.0 D in 0.5 D increments
• Cylinder power ranges from in 1.00 D to 6.00 D depending on spherical power

The ANKORIS Monofocal Toric Optic features a double c-loop haptic design for optimal rotational stability.

No

Yes

Hydrophilic Acrylic

6.0

Toric

• Trifocal diffractive optic with double C-loop ridged haptics
• Power ranges from +10.0 D to 35.0 D with additional powers of +1.75 D for intermediate vision and +3.50 D for near vision"

FineVision HP (Hydrophobic and Physiological trifocal IOL) is a trifocal hydrophobic glistening-free IOL. The double C-loop haptics provide optimal rotational stability and have ridged indentations called WaveTech to reduce the risk of stickiness between the haptics and optic during injection.

No

Yes

Hydrophilic Acrylic

6.0

Toric, Trifocal

• The FluidVision lens is implanted into the lens capsule like a standard IOL
• 36 month follow up clinical studies showed excellent visual acuity and offers 3 to 4 diopters of accommodative power

The FluidVision AIOL provides accommodation by moving a tiny amount of fluid inside the lens in response to the natural muscle forces in the eye. The Company has shown in clinical trials that it can deliver clear vision at all distances. The FluidVision lens is an investigational device that is not available for sale.

Investigational

Investigational

Not specified

Not specified

Accommodating

• Power ranges from -10.0 D to +7.0 D in 1.0 D increments, +8.0 D to +30.0 D in 0.5 D increments, and +31.0 D to +34.0 D in 1.0 D increments
• Injectable through a sub 2.2 mm incision
• Amon-Apple 360 degree enhanced square edge
• Closed loop with anti-vaulting haptic (AVH) design
• Made from Single piece Rayacryl hydrophilic acrylic

RayOne Aspheric (model RAO600C) is made from a homogeneous material not associated with glistenings. The design offers rotational and centrational stability, excellent fixation in the capsular bag, and has an aspheric anterior surface. RayOne Aspheric lenses offer the largest selection fully preloaded power ranges.

No

Yes

Hydrophilic Acrylic

6.0

Monofocal

• Power ranges from -10.0 D to +7.0 D in 1.0 D increments, +8.0 D to +30.0 D in 0.5 D increments, and +31.0 D to +34.0 D in 1.0 D increments
• Injectable through a sub 2.2 mm incision
• Amon-Apple 360 degree enhanced square edge
• Closed loop with anti-vaulting haptic (AVH) design
• Made from single piece Rayacryl hydrophilic acrylic

RayOne spheric (model RAO100C) is made from a homogeneous material not associated with glistenings. The design offers rotational and centrational stability and excellent fixation in the capsular bag. RayOne Aspheric lenses offer the largest selection fully preloaded power ranges.

No

Yes

Hydrophilic Acrylic

6.0

Monofocal

• Power ranges from +8.0 D to +29.5 D in 0.5 D increments and +30.0 D to +34.0 D in 1.0 D increments
• Amon-Apple 360 degree enhanced square edge
• Closed loop with anti-vaulting haptic (AVH) design
• Supplied with a syringe-style injector for single-handed insertion
• Made from single piece Rayacryl hydrophilic acrylic

The C-flex Aspheric (model 970C) is a hydrophilic acrylic aspheric monofocal IOL with a 360° enhanced square edge and aberration-neutral optic technology. The design offers rotational and centrational stability and excellent fixation in the capsular bag.

No

Yes

Hydrophilic Acrylic

5.75

Monofocal

• Power ranges from -10.0 D to -1.0 D in 0.5 D increments and +1.0 D to +22.0 D in 0.5 D increments
• Amon-Apple 360 degree enhanced square edge
• Closed loop with anti-vaulting haptic (AVH) design
• Supplied with a syringe-style injector for single-handed insertion
• Made from single piece Rayacryl hydrophilic acrylic

Superflex Aspheric (model 920H) is a hydrophilic acrylic aspheric monofocal IOL with a 360? enhanced square edge and aberration-neutral optic technology. The design offers rotational and centrational stability and excellent fixation in the capsular bag.

No

Yes

Hydrophilic Acrylic

6.25

Monofocal

• Power ranges from +8.0 D to +29.5 D in 0.5 D increments and +30.0 D to +34.0 D in 1.0 D increments
• Amon-Apple 360 degree enhanced square edge
• Closed loop with anti-vaulting haptic (AVH) design
• Supplied with a syringe-style injector for single-handed insertion
• Made from single piece Rayacryl hydrophilic acrylic

The C-flex Aspheric (model 570C) is a hydrophilic acrylic monofocal IOL with a 360 degree enhanced square edge and aberration-neutral optic technology. The design offers rotational and centrational stability and excellent fixation in the capsular bag.

Yes

Yes

Hydrophilic Acrylic

6.25

Monofocal

• Power ranges from -10.0 D to -1.0 D in 0.5 D increments and +1.0 D to +22.0 D in 0.5 D increments
• Amon-Apple 360 degree enhanced square edge
• Closed loop with anti-vaulting haptic (AVH) design
• Supplied with a syringe-style injector for single-handed insertion
• Made from single piece Rayacryl hydrophilic acrylic

Superflex Aspheric (model 620H) is a hydrophilic acrylic monofocal IOL with a 360? enhanced square edge and aberration-neutral optic technology. The design offers rotational and centrational stability and excellent fixation in the capsular bag.

No

Yes

Hydrophilic Acrylic

6.25

Monofocal

• Power ranges from 0.0 D to +30.0 D in increments 0.5 D; Trifocal, diffractive, +3.5 D near add and +1.75 D intermediate add at the IOL plane
• Features 16 diffractive rings/steps with 4.5 mm diffractive zone and
• 4.5 mm monofocal, distance
• Developed to be less dependent on pupil size or lighting conditions
• Amon-Apple 360 degree enhanced square edge
• Closed loop with anti-vaulting haptic (AVH) design
• Made from single piece Rayacryl hydrophilic acrylic

RayOne Trifocal IOL (model RA0603F) has a patented diffractive profile with fewer rings on the optic surface than many trifocal IOLs for reduced potential visual disturbances and improved night vision.

No

Yes

Hydrophilic Acrylic

6.25

Trifocal

• +3.0 D add power ranges from +14.0 D to +30.0 D in 0.5 D increments
• +4.0 D add power ranges from +10.0 D to +30.0 D in 0.5 D increments
• Amon-Apple 360 degree enhanced square edge
• Closed loop with anti-vaulting haptic (AVH) design
• Made from single piece Rayacryl hydrophilic acrylic

M-flex Multifocal IOL (models 580F and 630F) is available in +3.0 D add for patients that predominantly participate in intermediate and distance activities such as computer work or seeing a vehicle dashboard and +4.0 D add for patients that predominantly participate in near and distance activities such as reading or applying make-up.

No

Yes

Hydrophilic Acrylic

5.75, 6.25

Multifocal

• Power ranges from +14.0 D to +32.0 D in 0.5 D increments
• Cylinder power ranges available from +1.0 to +6.0 D in 0.5 D increments
• Amon-Apple 360 degree enhanced square edge
• Closed loop with anti-vaulting haptic (AVH) design
• Made from single piece Rayacryl hydrophilic acrylic

M-flex T Multifocal Toric IOL (models 588F and 638F) offers all the benefits of the M-flex and effectively corrects corneal astigmatism with a range of cylinder power options from 1 to 6 diopers.

No

Yes

Hydrophilic Acrylic

5.75, 6.25

Multifocal, Toric

• Power ranges from -7.0 D to +7.0 D in 0.5 D increments
• Cylinder power ranges from +1.0 D to +6.0 D in 0.5 D increments
• Large 6.5mm round-edged optic for reduced risk of iris-optic capture
• The undulating haptic design improves rotational stability for precise optimal corrections
• Made from single piece Rayacryl hydrophilic acrylic

Sulcoflex Multifocal Toric lens (model 653Z) is a hydrophilic acrylic supplementary IOL with a unique posterior concave surface designed to minimize the possibility of interaction with the primary IOL. The refractive aspheric optic offers a near addition of +3.5 D at the IOL plane in a far dominant format and a toric correction of +1.0 D, +2.0 D and +3.0 D cylinders.

No

Yes

Hydrophilic Acrylic

6.5

Multifocal, Toric, Supplementary

• Power ranges from -7.0 D to +7.0 D in 0.5 D increments
• Large 6.5mm round-edged optic for reduced risk of iris-optic capture
• The undulating haptic design improves rotational stability for precise optimal corrections
• Made from single piece Rayacryl hydrophilic acrylic

Sulcoflex Multifocal lens (model 653F) is a hydrophilic acrylic supplementary IOL with a unique posterior concave surface designed to minimize the possibility of interaction with the primary IOL. The refractive aspheric optic offers a near addition of +3.5 D at the IOL plane in a far dominant format.

No

Yes

Hydrophilic Acrylic

6.5

Multifocal, Supplementary

• Power ranges from 9.5 D to +34.0 D in increments 0.5 D
• Cylinder powers range from +1.0 D to +11.0 D in 0.5 increments (subject to sphere power)
• Amon-Apple 360 degree enhanced square edge
• Closed loop with anti-vaulting haptic (AVH) design
• Biconvex (positive powers), Convex/Concave posterior surface (negative powers)
• Made from single piece Rayacryl hydrophilic acrylic

RayOne Toric (RAO610T) is made from a homogeneous material not associated with glistenings. Closed looped haptic configuration was designed to offer excellent centration with rotational, torsional and directional stability.

No

Yes

Hydrophilic Acrylic

6.0

Toric

• Power range for standard lenses from +6.0 D to +30.0 D in 0.5 D increments and cylinder power range from +1.0 D to +6.0 D in 0.5 D increments
• Power range for made to order lenses from -10.0 D to +35.0 D in 0.5 D increments (subject to spherical equivalent) and cylinder power ranges from +1.0 D to +11.0 D in 0.5 D increments
• Amon-Apple 360? enhanced square edge
• Closed loop with anti-vaulting haptic (AVH) design
• Made from single piece Rayacryl hydrophilic acrylic

The T-flex Aspheric Toric lens (models 573T and 623T) features a closed looped haptic configuration progressively absorbs forces generated within the contracting capsular bag to offer excellent centration with rotational, torsional and directional stability.

No

Yes

Hydrophilic Acrylic

5.75, 6.25

Toric

• Power ranges from -10.0 D to +10.0 D in 0.5 D increments
• Large 6.5mm round-edged optic for reduced risk of iris-optic capture
• The undulating haptic design improves rotational stability for precise optimal corrections
• Made from single piece Rayacryl hydrophilic acrylic

Sulcoflex Aspheric (model 653L) is a hydrophilic acrylic supplementary IOL with a unique posterior concave surface designed to minimize the possibility of interaction with the primary IOL.

No

Yes

Hydrophilic Acrylic

6.5

Monofocal, Supplementary

• Power ranges from -7.0 D to +7.0 D in 0.5 D increments
• Cylinders power ranges from +1.0 D to +6.0 D in 0.5 D increments
• Large 6.5mm round-edged optic for reduced risk of iris-optic capture
• The undulating haptic design improves rotational stability for precise optimal corrections
• Made from single piece Rayacryl hydrophilic acrylic

The Sulcoflex Toric IOL (model 653T) is a hydrophilic acrylic supplementary IOL with a unique posterior concave surface designed to minimize the possibility of interaction with the primary IOL. This lens is indicated for the correction of any residual pseudophakic corneal astigmatism.

No

Yes

Hydrophilic Acrylic

6.5

Toric, Supplementary

• Allows for in-office optimization after lens implantation and wound healing

The RxLAL light adjustable lens is the first IOL to enable refractive correction after cataract surgery. Biocompatible materials called macromers incorporated into the makeup of the IOL undergo a chemical change known as photopolymerization in response to ultraviolet light of a certain wavelength. Using a proprietary light treatment surgeons can precisely reshape the lens based on the exact amount of visual correction and optimization needed to achieve desired vision after implantation.

Yes

Not specified

Not specified

Not specified

Adjustable

• Biconvex, Equi-Aspheric optic with overall lens diameter of 10.8 mm with 0.9 mm fenestrations on each haptic
• Power ranges from +10.5 D to +30.5 D

The NanoFLEX Collamer IOL (model CC4204A) is an ultraviolet-absorbing posterior chamber single piece lens made from collamer with plate haptics.

Yes

Yes

Collamer

6.0

Monofocal

• Biconvex, Equi-Aspheric optic with overall lens diameter of 10.8 mm with 0.9 mm fenestrations on each haptic
• Power ranges from +10.5 D to +30.5 D

The Afinity Collamer IOL (model CQ2015A) is an ultraviolet-absorbing posterior chamber multipiece lens with a collamer optic and gold polymide haptics.

Yes

Yes

Collamer

6.0

Monofocal

• Power ranges from + 8.0 D to +30.0 D in 0.5 D increments and + 31.0 D to +34.0 D in 1.0 D increments
• Injectable through a sub 2.2 mm incision
• Amon-Apple 360 degree enhanced square edge
• Open loop with anti-vaulting haptic (AVH) technology
• Made from Single piece Rayacryl hydrophilic acrylic

The Rayner 600C Aspheric lens is an aberration neutral lens made from a homogeneous material not associated with glistenings.

Yes

Not specified

Hydrophilic Acrylic

6.0

Monofocal

• Incision Size: 1.5 mm
• Power ranges from 0.0 to +10.0 D in 1.0 D increments, +10.0 to +30.0 D in 0.5 D increments, and +30.0 to +32.0 D in 1.0 D increments
• ACD is 4.91
• Hydrophilic Acrylic (25%) with hydrophobic surface properties

The CT SPHERIS 209M is a monofocal spheric MICS IOL. The implantation of the CT SPHERIS 209M through a microincision minimizes the surgically induced astigmatism and decreases the risk of endothelial cell loss. It also promotes rapid wound healing and accelerated postoperative regeneration.

No

Yes

Hydrophilic Acrylic

6.0

Monofocal

• Incision Size: 1.8 mm
• Power ranges from 0.0 to +10.0 D in 1.0 D increments, +10.0 to +30.0 D in 0.5 D increments, and +30.0 to +32.0 D in 1.0 D increments
• ACD is 4.97
• Hydrophilic Acrylic (25%) with hydrophobic surface properties

The easy implantation of the preloaded CT ASPHINA 409MP with the BLUEMIXS 180 injector through a 1.8 mm incision does not diminish the optical quality of the cornea or induce corneal astigmatism.

No

Yes

Hydrophilic Acrylic

6.0

Monofocal

• Incision Size: 1.8 mm
• Power ranges from 0.0 to +10.0 D in 1.0 D increments, +10.0 to +30.0 D in 0.5 D increments, and +30.0 to +32.0 D in 1.0 D increments
• ACD is 5.14
• Hydrophilic Acrylic (25%) with hydrophobic surface properties

The easy implantation of the preloaded CT ASPHINA 409MP with the BLUEMIXS 180 injector through a 1.8 mm incision does not diminish the optical quality of the cornea or induce corneal astigmatism.

No

Yes

Hydrophilic Acrylic

6.0

Monofocal

• Incision Size: 1.8 mm
• Spherical power range is -10.0 to +28.0 D in 0.5 D increments and the cylinder power range is +1.0 to +4.0 D in 0.5 D increments
• ACD is 5.14
• Hydrophilic Acrylic (25%) with hydrophobic surface properties

This ZEISS bitoric IOL provides the technology to correct more patients’ astigmatism with greater precision and better outcomes. Based on the successful ZEISS MICS IOL platform, the AT TORBI provides: high rotational stability after surgery, easy rotation during surgery, MICS compatibility for astigmatically neutral surgery, and advantages of a bitoric design.

No

Yes

Hydrophilic Acrylic

6.0

Monofocal, Bitoric

• Incision Size: 1.8 mm
• Power rannges from 0.0 to +32.0 D in 0.5 D increments
• ACD is 4.85
• Hydrophilic Acrylic (25%) with hydrophobic surface properties

The AT LISA 809M/MP was the first preloaded multifocal MICS IOL. The optical design of the AT LISA enhances the depth of field, which in turn enhances the static apparent accommodation.

No

Yes

Hydrophilic Acrylic

6.0

Multifocal

• Incision Size: 1.8 mm
• Spherical power range is -10.0 to +24.0 D in 0.5 D increments and the cylinder power range is +1.0 to +4.0 D in 0.5 D increments
• ACD is 5.14
• Hydrophilic Acrylic (25%) with hydrophobic surface properties

The AT LISA 909M/MP is a preloaded multifocal MICS IOL. The optical design enhances the depth of field, which in turn enhances the static apparent accommodation. It also promotes rapid wound healing and accelerated postoperative regeneration.

No

Yes

Hydrophilic Acrylic

6.0

Multifocal

• Incision Size: 1.8 mm
• Power ranges from -10.0 to +32.0 D in 0.5 D increments
• ACD is 5.20
• Hydrophilic Acrylic (25% water contents) with hydrophobic surface properties

The AT LARA 829MP EDOF IOL is designed to provide a high degree of spectacle independence and to induce less visual side effects compared to multifocal IOLs, enabling excellent vision over a wide range of distances.

No

Yes

Hydrophilic Acrylic

6.0

Diffractive