Compare Cannulas

arrow Created with Sketch.
arrow Created with Sketch.
16 Products

reset all

At-a-Glance

Description

FDA

CE Mark

Type

  • Beveled tip with 1mm bend to tip length
  • Made from stainless steel
  • Each box contains 10 units, $6.00 per unit

The right angle facilitates placement beneath the sub-incisional capsulorrhexis edge to preferentially lossen the subincisional cortex. The tip is short enough to flip around to hydrodissect in new areas and is flattened to produce a fan-like jet. Tip has a dull point to engage and spin the peripheral nuclear surface with a circular raking motion to confirm adequate nuclear mobility.

Yes

Yes

Single-use

  • Designed By Dr Takayuki Akahosh
  • Overall Length 39mm; tip 21mm
  • Each box contains 10 units, $6.00 per unit

The Akahoshi 27 gauge disposable cannula facilitates hydrodissection. Beveled tip can be easily inserted beneath the capsulorrhexis edge. Tapered design easily increases the intraocular pressure for sealing the wound.

Yes

Yes

Single-use

remove

close Created with Sketch.
  • Made from stainless steel
  • Each box contains 10 units, $4.00 per unit

This 25-gauge curved cannula has a vertical flattened tip for effective hydrodissection. It is also available as a disposable item. The overall length is 20mm.

Yes

Yes

Single-use

remove

close Created with Sketch.
  • Made from stainless steel
  • Blunt tip
  • Each box contains 10 units, $4.00 per unit

This single-use Rycroft Air Injection Cannula is 30-gauge cannula, 3/4" (19.10mm) in length.

Yes

Yes

Single-use

remove

close Created with Sketch.
  • Made of stainless steel, blunt tip with angled shaft (5mm from tip to bend)
  • Each box contains 10 units, $4.00 per unit

This single-use Rycroft Air Injection Cannula is 27-gauge and 3/4" (19.10mm) in length.

Yes

Yes

Single-use

remove

close Created with Sketch.
  • Each box contains 10 units, $4.00 per unit

The 25-gauge Peribulbar Needle is a 7/8" (22.20mm) disposable cannula with single bevel for periocular injections.

Yes

Yes

Single-use

remove

close Created with Sketch.
  • Each box contains, 10 units, $4.00 per unit

The 23-gauge Peribulbar Needle is a 1 1/4" (31.80mm) disposable cannula with single bevel for periocular injections.

Yes

Yes

Single-use

remove

close Created with Sketch.
  • Oval tip shape
  • Each box contains 10 units, $4.00 per unit.

This Atkinson Retrobulbar Needle is a 23-gauge disposable cannula with length of 1 1/2" (38.10mm).

Yes

Yes

Single-use

remove

close Created with Sketch.
  • Oval tip
  • Each box contains 10 units, $4.00 per unit

This Atkinson Retrobulbar Needle is a 25-gauge disposable cannula with length of 1 1/2" (38.10mm).

Yes

Yes

Single-use

remove

close Created with Sketch.
  • Made from stainless steel
  • Each box contains 10 units, $4.00 per unit

This Bishop-Harmon Irrigating Cannula is a 19-gauge single-use disposable cannula that measures 34mm overall, and 7mm angle to tip.

Yes

Yes

Single-use

remove

close Created with Sketch.
  • Flattened tip with round handle
  • 7mm from tip to bend
  • Each box contains 10 units, $5.00 per unit

The Terry Capsule Polisher is a 27-gauge disposable cannula with silicone sleeve for polishing posterior capsule. Angle to tip is 7mm.

Yes

Yes

Single-use

remove

close Created with Sketch.
  • Each box contains 10 units, $5.00 per unit

25-gauge hydrodissection cannula with flat tip for superior pole dissection. The overall length is 18mm, and the tip width is 2.5mm.

Yes

Yes

Single-use

  • Each box contains 10 units, $4.00 per unit

This 25-gauge disposable cannula with an angled tip allows for horizontal flow. The overall length is 20mm, and angle to top is 8mm.

Yes

Yes

Single-use

remove

close Created with Sketch.
  • Made from stainless steel
  • Blunt tip
  • Each box contains 10 units, $4.00 per unit

The Rycroft Air Injection is a 27-gauge 7/8" (22.20mm) disposable cannula.

Yes

Yes

Single-use

remove

close Created with Sketch.
  • Each box contains 10 units, $4.00 per unit

 

This 27-gauge disposable Nucleus Hydrodissection Cannula has an angled tip and horizontal flow. The overall length is 20mm, and angle to top is 8mm.

Yes

Yes

Single-use

remove

close Created with Sketch.
  • Designed By William Wiley, MD
  • Made from medical grade stainless steel
  • Length is 0.76 inches, 19.3mm (excluding hub)

This cannula is designed to assist in reestablishing the lens capsule-cortex plane prior to hydrodissection in Femto cases. The sharpened leading edge allows polishing of a portion of the anterior capsule so fluids hydrodissect in an expected controlled manner.

Yes

Yes

Reusable